☛How to pair the receiver to remote?
1.Press the shock button or vibration button to turn on the remote
2. Choose a Channel 1 or 2 or 3 by press the CH button
3.Press the vibration button, adjust the level by press – OR + button, make sure the level above 01.
4. Press the power button of the receiver by 3 seconds, you hear a sound like Bee~, and the indicator light is flashing. Now quickly, press the vibration button or shock button within 10 seconds after the sound Bee~, you can hear a sound Bee~ again, that means the pairing successful.
5. If you Have 2 or 3 Receivers, just choose the different channel and pair as above same steps. Note: Please remember the channel you choose to pair, if you use another channel without pair, you can’t control the receiver.
★4 Modes: vibration/ shock/ LED light/ beep mode, 1-99 adjustable intensity levels for Shock and Vibration
★100% IPX7 Waterproof
★Remote control range: Up to 800 yards in open spaces (If there are obstacles around the range may be reduced to about 330 yards).
★This remote shock collar for dogs can fit almost all size dogs. Collar strap is adjustable from 7-26 inches. Shock collar for small dogs and shock collar for large dogs.
★Rechargeable Lithium Batteries for Collar Receiver and Remote Transmitter can be charged at the same time.
★LCD Display featuring a Blue Back Light for nighttime usage
★Flashlight on Receiver helps to find your dog easily in low brightness environment
★There are 3 signal channels on the remote transmitter, and it can control 3 receivers of the same model.
– 1 x Remote Transmitter
– 1 x Collar Receiver
– 1 x Adjustable Belt
– 1 x USB Charging Cable
– 1 x Charger
– 1 x Test Bulb
– 2 x Sets Contact Points
– 1 x User Manual